Home > Archive > BizTalk > microsoft.public.biztalk.general > 2004-06   Shop / Science   Privacy   

RE: secondary adress in a dynamic port

From: Nicolas (Nicolas_at_discussions.microsoft.com)
Date: 06/20/04

  • Next message: sfh: "help - Mapping message"
    Date: Sun, 20 Jun 2021 07:14:01 -0700
    

    Hi

    many thanks, I just wanted to know if there was a way to do it, but I hoped without orchestrator...

    I will try your idea and let you know.

    Thanks

    Nicolas

    "Stephen W. Thomas" wrote:

    > Working with Dynamic Ports is rather limiting. I know you can not assign maps to the port nor do I think you can specify a secondary address.
    >
    > As on option you might want to try something like this:.
    > 1. Put your Send Shape for your dynamic send port inside am Atomic scope shape
    > 2. Set Delivery Notification on the Send Port on the Port Surface to Transmitted
    > 3. If he process is not successful you should get an exception.
    > 4. Use a catch to catch that exception (Microsoft.XLANGs.BaseTypes.DeliveryFailureException)
    > 5. Use an expressions shape to change the port address
    > 6. Use a Send Shape to try to send the message again
    >
    > I haven’t tried it myself so please let me know if it works.
    >
    > Stephen W. Thomas
    >
    >
    > "Nicolas" wrote:
    >
    > > Hi all
    > >
    > > is there a way to setup a dynamic port with a secondary address?
    > > If possible without orchestrator...
    > >
    > > Thanks
    > >
    > > Nicolas


  • Next message: sfh: "help - Mapping message"
  • Home > Archive > BizTalk > microsoft.public.biztalk.general > 2004-06   Shop / Science   Privacy   
    This document was last modified: 06/21/04 11:53 CEST
    We are proud to be hosted by
    9 Net Avenue Deutschland