Re: Can't Connect Computers



DNS for the workstation(s) should point to the SBS server IP address
(192.168.1.103). Also, you may experience less problems if you turn off
DHCP Server Service on the router and let the SBS server handle DHCP for
your LAN. After turning off DHCP on the router, re-run CEICW, input your
ISP's DNS nameservers IPs as "forwarders" on the appropriate screen, select
Enable Firewall, select the services you want, then finish CEICW. Then
reboot the workstations to get an IP address from the SBS server.

Also, if the router has wireless capabilities, disable any wireless adapters
on the workstation(s) or turn this feature off on the router..

How to configure Internet access in Windows Small Business Server 2003
http://support.microsoft.com/default.aspx?scid=kb;en-us;825763

--
Merv Porter [SBS-MWP]
============================


"0013" <0013@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5FC7D182-E29A-4BCF-8F1E-1158AC851AE0@xxxxxxxxxxxxxxxx
From Server:
Windows IP Configuration
Host Name....................: sbs2003
Primary Dns Suffix.........: cjs.local
Node Type ...................: Unknown
IP Routing Enabled.........: Yes
WINS Proxy Enabled.......: Yes
DNS Suffix Search List....: cjs.local

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix.....:
Description.................................: Broadcom NetXtreme Gigabit
Ethernet
Physical Address.........................: 00-14-22-7A-CF-20
DHCP Enabled.............................: No
IP Address..................................: 192.168.1.103
Subnet Mask...............................: 255.255.255.0
Default Gateway..........................: 192.168.1.1
DNS Servers...............................: 192.168.1.103
Primary WINS Server...................: 192.168.1.103

From workstation:

Windows IP Configuration

Host Name . . . . . . . . . . . . : CJSTABLET
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2915ABG
Network Connection
Physical Address. . . . . . . . . : 00-12-F0-C7-D5-F5

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit
Ethernet
Physical Address. . . . . . . . . : 00-0A-E4-35-AE-CF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.105
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 128.103.201.100
128.103.200.101
128.103.1.1
Lease Obtained. . . . . . . . . . : Thursday, September 14, 2021
7:29:55
PM
Lease Expires . . . . . . . . . . : Friday, September 15, 2021
7:29:55 P
M

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Bluetooth LAN Access Server
Driver
Physical Address. . . . . . . . . : 00-0E-9B-DE-97-FF


"Cris Hanna [SBS-MVP]" wrote:

please run "IPconfig /all" without the quotes on your server and post the
results here

--
Cris E. Hanna [SBS-MVP]
----------------------------------------
Please only reply in the Newsgroups and not to me directly.
-----------------------------------------
Posted via Windows Mail, on Vista Technical Edition, RC1
"0013" <0013@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7BD2A0B9-E7C2-4932-8919-EA8277228F3E@xxxxxxxxxxxxxxxx
I can't connect any computers to the network. I have added the computer
via
the server and when I open a browser on that computer and go to
http://sbs2003/connectcomputer I get an error saying "Make sure that
only
one
network adapter is enabled and that it is connected to the small
business
server."

If I re-run setup, it tells me that "This computer has only one network
adapter."
The computer has one network card and I have an external wireless
router
where the source ethernet connection is plugged into. I think that may
have
something to do with it. Also, I had a problem, where after the
initial
installation, I couldn't get to the external internet, only the SBS
intranet,
from any computers connected to my router. I reset the router and was
able
to get to the internet, so that may have something to do with it also.

Thanks in advance for any help



.



Relevant Pages

  • Re: CEICW & software updates...
    ... SBS/Windows Server 2003, etc is just not quite UPNP aware the way it ... MVPs do not work for Microsoft ... I'm not getting prompted for an internet connection type. ... DNS server is installed and not disabled Call to Changing ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Server Local Area Connection: ... Connection-specific DNS Suffix: ... dish that I have currently plugged into the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Server Local Area Connection: ... Connection-specific DNS Suffix: ... dish that I have currently plugged into the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Server Local Area Connection: ... Connection-specific DNS Suffix: ... dish that I have currently plugged into the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Server Local Area Connection: ... Connection-specific DNS Suffix: ... dish that I have currently plugged into the router. ...
    (microsoft.public.windows.server.sbs)